FORD FOCUS COMPASS TRANSDUCER MODULE LOCATION REPLACEMENT. COMPASS NOT WORKING FIXIf you need to remove the compass transducer module or replace the compass
745. Name: Naz. Ford Model: FOCUS MK2. Ford Year: 2010. UK/Ireland Location: West Midlands. Posted March 13, 2013. You can swap the module I did. To get the heated seats to work. You will have problem with central locking as once you swap it the central locking deactivated and needs to be activated.
Relays location: Relay: Engine compartment relay module #1: ABS pump: R. trailer turn: Rear wiper down: Rear wiper up: L. trailer turn: ABS main: Engine compartment relay module #2: Blower motor: Hi-speed blower: Fog lamp: Front washer pump: Engine compartment relay module #3: Automatic ride control: Instrument panel relay module #4: Dimmer On a Focus MK/MK2.5 with Bluetooth/Voicecontrol the radio stalk at the steering column has an extra "VOICE" button to activate the Voicecontrol function. If the radio stalk at the steering column does not have the "VOICE" button the car does not have Bluetooth. The Body Control Module (BCM) could be considered a central organizational module for your vehicle. It streamlines the manufacturing and troubleshooting aspects of electronic modules by housing the modules into one, central unit instead of each function having its own device.

Posted August 30, 2016. The software of the Focus MK2/MK2.5 GEM module can not be updated. There are several versions of the GEM module installed during production. Each part number supports different options. The GEM module should only be replaced by another one that supports the same (or more) options otherwise some functions may not work. As

Hi guys and girls. Newbie to the forum. I've had my MK7 Fiesta Zetec for about five months now. It's an Australia spec model, so it's more a Titanium with a body kit, but still looks the !Removed!! Ford Focus (1998-2004 / MK 1) In this video, we can see where the central locking control module is located in the Ford Focus, useful in case we need to replace it in case of malf How to remove the central tunnel mounted on a Ford Focus
The GEM module is mounted on top of the interior fuse box with 3 screws. You will need to remove the fuse box and GEM together as an assembly to inspect it. Remove the two large bulkhead connectors on the back of the fusebox, (they are bolted in place with a long 10mm headed bolt), remove the two nuts and two bolts securing the fusebox, slide
DXiryH.
  • x5ht5kn6f5.pages.dev/282
  • x5ht5kn6f5.pages.dev/409
  • x5ht5kn6f5.pages.dev/191
  • x5ht5kn6f5.pages.dev/440
  • x5ht5kn6f5.pages.dev/148
  • x5ht5kn6f5.pages.dev/145
  • x5ht5kn6f5.pages.dev/482
  • x5ht5kn6f5.pages.dev/468

    • ford focus mk2 gem module location